← Products
PureMounts® Touch Screen TV Cart - Single Display up to 70"
Discontinued

PDS-2101C

PureMounts® Touch Screen TV Cart - Single Display up to 70"

PureMounts® Touch screen TV Cart - Single Display up to 70".

ManualFAQ
PDF / print
Chapter 1 of 5

页 1

Flat Panel Display Stand & Cart and Accessories

INSTALLATION MANUAL

Caution: DO NOT EXCEED RATED LISTED WEIGHT. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR!

200x200/300x300 400x200/400x400

600x400

PDS-2201S 70" MAX

70kg (154lbs)

RATED

PDS-2201C 70" MAX

200x200/300x300 400x200/400x400 600x400

Maintenance

  • Check that the bracket is secure and safe to use at regular intervals (at least every three months).
  • Please contact your distributor if you have any questions.

Note: The accessories are not standard. The accessories will be selected according to user requirement.

Optional Accessories

PDS-2101C 70" MAX

200x200/300x300 400x200/400x400 600x400

PDS-2101S 70" MAX

200x200/300x300 400x200/400x400 600x400

Run the cables through the cable clamps and the rubber strip.

9. Adjustment

Chapter 2 of 5

页 2

Caution: Read the entire instruction manual before you start installation and assembly.

  • Do not begin the installation until you have read and understood all the instructions and warnings contained in this installation sheet. If you have any questions regarding any of the instructions or warnings, please contact your local distributor.
  • This mounting bracket was designed to be installed and utilised ONLY as specified in this manual. Improper installation of this product may cause damage or serious injury.
  • Always use an assistant or mechanical lifting equipment to safely lift and position the equipment.
  • Tighten screws firmly, but do not over tighten. Over tightening can cause damage to the items, This greatly reduces their holding power.
  • This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.

Package M

  • washer M-F (x4)
  • M8x20 M-C (x4)
  • M5x14 M-A (x4)
  • M6x14 M-B (x4)
  • big spacer (x4) M-H
  • M6x30 M-D (x4)
  • M8x30 M-E (x4)
  • small spacer (x8)
  • M-G M8x65 (x8)
  • J cable clamp (x4)
  • I M8x40(X4)
  • L 5mm Allen key (x1)
  • M 6mm Allen key (x1)
  • N D8 washer (x4)
  • O Component (PDS-2101C/PDS-2201C only) supporting foot (x4)
  • Scaster wheel/brake P (x2) caster wheel Q (x2) wrench (x1)
  • R Component (PDS-2101S/PDS-2201S only) rubber pad (x4)
  • T (Peel off the backing paper from the rubber pad and stick the rubber pad on to the supporting foot.)

PDS-9501 (The following accessories are optional)

  • power socket (x1)
  • T-H ST4.8x9.5 (x4)
  • P-G

Component Checklist: IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation.
If any parts are missing or faulty, telephone your local distributor for a replacement.

PDS-2101C/PDS-2101S PDS-2201C/PDS-2201S

  • adapter bracket G (x2)
  • middle base (x1) A
  • left cover D (x1)
  • right cover (X1) E
  • left base B (x1)
  • right base C (x1)
  • column (x1) H
  • universal plate (x1) F
  • M8x16 (x4) K
Chapter 3 of 5

页 3

1. Assembling the Base

Attach the left and right base to the middle base using the appropriate screws. Tighten all screws with an Allen key.

2. For the model PDS-9501 installation

Note: Assembly based on the accessories selected by user.

3. Attaching the Column to the Base

Attach the power socket to the back of column using the appropriate screws. Tighten all screws with a phillips screwdriver.
Attach the column to the assembled base using the appropriate screws and washers.
Tighten all screws with an Allen key.

Note: Lock the brakes on the casters to avoid any sudden movements during installation.

J N T-H L N O

4. Installing the Covers

D E

5. Installing the Universal Plate

Attach the universal plate to the column using the appropriate screws.
Tighten all screws with an Allen key.

P-G

6. Installing the Adapter Brackets

Top of the display
Note: With the brake wheels facing forward.

M K B A C

Chapter 4 of 5

页 4

6-1 For Flat Back Screens

TV
TVTV
M-A/M-B/M-C
M-F

6-2 For Recessed Back Screens or to Access A/V Inputs

TV
TVTV

Tighten all screws but do not over tighten.
2 Position the adapter brackets as close as possible to the center of the display.
2 Screw the adapter brackets onto the display.
Note: Choose the appropriate screws, washers and spacers (if necessary) according to the type of screen.

orM-F M-C M-G M-C M-D/M-E/ M-F M-G M-D/M-E M-F M-H M-D/M-E M-F M-G M-H or or

7. Hanging the Display onto the Universal Plate

8. Cable Management

Insert the cable clamps horizontally into the plate slots, then turn the cable clamps to the vertical to secure them.
I

Lift the display carefully and pull downward two straps at the same time , then hook the adapter brackets to the universal plate. Fasten the adapter brackets to the universal plate by releasing the straps.

Was this helpful?
← PreviousNext chapter →
Staff sign-in