VESA Adapter
INSTALLATION MANUAL
PUREMounts
PM-ADAPT-D
PM-ADAPT-DW
300x300
400x200
400x400
23-55'' 59-140cm
30kg (66lbs) RATED
PureLink GmbH
Von-Liebig-Str. 10 | 48432 Rheine | Germany
Phone: +49 (0) 5971 800 299 0
PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.
EN
- Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor.
- CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
- Carefully inspect the location where the bracket is to be installed. Ensure that it is capable of supporting the combined load of the equipment and hardware.
- Improper installation may result in damage or serious injury.
- When mounting the bracket on a wall, ensure that no electrical cables, water or gas pipes are located within the wall. The bracket must be attached securely to the wall’s support structure using the supplied anchoring components. If you are uncertain about the nature of the wall, consult an expert.
- Some installation steps must be performed by two or more persons to ensure safe assembly.
- The product is intended for indoor use only. DO NOT install outdoors.
- This product contains small parts which may pose a choking hazard if swallowed. Keep these parts away from small children.
- DO NOT use this product for any purpose not explicitly specified by the manufacturer.
Note: Ensure that you have received all parts as indicated on the enclosed parts list. If any parts are missing or faulty, telephone your local distributor for a replacement. Never use faulty parts.
Note: MAINTENANCE: Check the bracket to ensure it is secure and safe to use at regular intervals (at least every three months).
A (x2) B (x2) C (x8)
M6x30 (x4) M-A M8x30 (x4) M-B M-C (x4)
1a
VESA 400x400/300x300
400mm 300mm
400mm 300mm
1b
VESA 400x200
400mm 200mm
400mm 200mm
2
M-A M-B
M-C
Legal & Compliance
Product identification
Model: PM-ADAPT-DW – manual version 1.0
Warranty and liability
The manufacturer grants the full statutory warranty on all new devices. As the manufacturer has no influence on installation, the warranty only applies to the product itself. If you detect a fault or damage, please contact your dealer and provide your sales slip or invoice as proof of purchase.
The manufacturer is not liable for damage to persons or property caused by improper installation, operation or maintenance not described in this manual. Do not alter or modify the product or its accessories. Any use other than described in this manual is not permitted and voids warranty and guarantee.
Trademarks and disclaimer
Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.
Packaging
Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.