Product Introduction
The PT-SPK-AWP300x is an active wall speaker set with balanced inputs, designed for meeting and conference rooms, classrooms, and similar environments. Despite its compact form, it delivers impressive, well-balanced audio through integrated two-way speaker units, featuring a dedicated bass woofer and a combined midrange and tweeter. The system provides up to 2 × 30 W output, a wide frequency response of 50 Hz to 20 kHz, multiple input options, and convenient controls, ensuring flexible installation and reliable everyday performance use.
Feature
- 2 x 30 W stereo output and black speakers, ideal for meeting rooms, classrooms and similar installations
- Wide frequency response from 50 Hz to 20 kHz with 1.0" tweeter and 5.25" bass driver
- Multiple audio inputs including 1 x RCA, 1 x 3.5mm stereo and 1 x balanced input plus LOOP and Sub outputs
- Controls for volume, treble and bass with automatic ECO standby after 15 seconds of no signal
- Active/passive speaker pair with magnetic shielding for reliable operation near other AV equipment
Package List
- 1 x PT-SPK-AWP300x Active speaker pair
- 2x Mounting brackets
- 1 x EU Power cord
- 1 x Manual
Note: Please contact your distributor immediately if any damage or defect in the components are found
Panel Description
| No. | Name | Description |
|---|---|---|
| 1 | 3.5 mm Stereo Jack Input | Line-level stereo input for connecting computers and portable audio devices. |
| 2 | RCA Input | Line-level input for audio sources such as media players, tuners, or mixing desks. |
| 3 | Balanced Input | Line-level balanced input for professional audio sources. |
| 4 | Loop Out | Signal output for connection to another speaker or external amplifier. |
| 5 | Sub Out | Signal output for connecting an external subwoofer. |
| 6 | Speaker Out | Two-pin phoenix connector for the supplied passive speaker only. Ensure correct polarity (+ to +, – to –). |
| 7 | LED Indicator | Illuminates blue when the unit is powered on. |
| 8 | Treble Control | Adjusts high frequencies; centre position provides neutral sound. |
| 9 | Bass Control | Adjusts low frequencies; increase for depth or reduce for speech clarity. |
| 10 | Volume Control | Adjusts the overall output level. |
| 11 | Power Switch | On (I), Off (0) or Auto off (II) after 15 seconds of no signal. |
| 12 | AC Power | Connect to the supplied mains power cable. |
Specification
| Specification | Value |
|---|---|
| Frequency response | 45 Hz – 20 Khz @-10dB, 50Hz to 20kH @±3dB |
| Sensitivity | 88dB |
| RMS rated power | 2 x 30 Watt (4 Ω) |
| Max SPL (sound pressure level) 1m distance | 110 dB |
| Speaker units | Bass : 5.25" Tweeter dome:1.0" |
| Enclosure Construction | Plastic |
| Mounting panel | Steel |
| Magnetically Shielded | Yes |
| Power supply | 110 - 240 Volt AC |
| Power consumption | Max. 75 Watt |
| Signal in | 1 x RCA, 1 x Stereo 3.5 mm, 1 x 5 pin Balanced |
| Signal Out | 1 x Loop & 1 x SUB out |
| Speaker output | 2 pin Phoenix |
| Power Supply Input | 100VAC~240VAC, 50/60Hz; |
| Power consumption | Max. 75 Watt |
| Operation Temperature | 0~55°C |
| Relative Humidity | 10%-90% |
| Colour | White (PT-SPK-AWP3001) or Black (PT-SPK-AWP3000) |
| Weight | 6.26 kg |
| Dimensions (W*D*H) | PT-SPK-AWP300X-Right: 178mm x 240mm x 162mm PT-SPK-AWP300X-Left: 178mm x 240mm x 162mm |
After-Sales Service
If there appear some problems when running the product, please check and deal with the problems referring to this user manual. Any transport costs are borne by the users during the warranty.
- Product Limited Warranty: This product will be free from defects in materials and workmanship for three years (The purchase invoice shall prevail). Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the unit is within the Warranty period must be presented to obtain warranty service.
- What the warranty does not cover (servicing available for a fee):
- Warranty expiration.
- Factory applied serial number has been altered or removed from the product.
- Damage, deterioration or malfunction caused by:
- Normal wear and tear.
- Use of supplies or parts not meeting our specifications.
- No certificate or invoice as the proof of warranty.
- The product model showed on the warranty card does not match with the model of the product for repairing or had been altered.
- Damage caused by force majeure.
- Servicing not authorized by distributor.
- Any other causes which does not relate to a product defect.
- Delivery, installation or labor charges for installation or setup of the product.
Technical Support: For any questions or problems, contact your distributor or reseller and tell them the respective product name and version, the detailed failure situation as well as the formation of the cases.
Asking for Assistance
Technical Support:
Phone: +49 5971 800299 - 0
Fax: +49 5971 800299 – 99
Technical Support Hours:
- 8:30 AM to 5:00 PM Monday thru Thursday
- 8:30 AM to 4:00 PM Friday
Write to:
PureLink GmbH
Von-Liebig-Straße 10 D - 48432 Rheine
www.purelink.de
Legal & Compliance
Product identification
Models: PT-SPK-AWP3000, PT-SPK-AWP3001 – manual version 1.0
Trademarks and disclaimer
Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.
EU conformity
PureLink GmbH hereby declares that this product PureTools PT-SPK-AWP-3000 and PT-SPK-AWP-3001 complies with the RoHS Directive 2011/65/EU amended by 2015/863 EU, the EMC Directive 2014/30/EU, LVD Directive 2014/35/EU and Ecodesign Directire 009/125/EC.
| Directive / Regulation |
|---|
| 2011/65/EU |
| 2014/30/EU |
| 2014/35/EU |
The full text of the EU Declaration of Conformity is available at: http://www.purelink.de
Disposal of electrical and electronic equipment
WEEE reg. no.: DE 93847290
The crossed-out wheelie bin symbol on the product, packaging or in this manual means that electrical and electronic equipment must not be disposed of with household waste at the end of its life. Hand in old devices free of charge at a public collection point or return them to a distributor obliged to take them back. Remove batteries and lamps that can be removed without destroying the device before handing it in, and delete any personal data stored on the device. Details are regulated by national law. By returning old devices you help protect the environment.
Packaging
Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.