Safety precautions

To ensure the best from the product, please read all instructions carefully before using the device. Save this manual for further reference.

• Unpack the equipment carefully and save the original box and packing material for possible future shipment.
• Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
• Do not dismantle the housing or modify the module. It may result in electrical shock or burn.
• Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or malfunction.
• Refer all servicing to qualified service personnel.
• To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
• Do not put any heavy items on the extension cable in case of extrusion

Introduction

The Digital to Analog Audio Decoder features an integrated 24 bit audio DSP. This unit can decode a variety of digital audio formats, including Dolby Digital (AC3), DTS and PCM. It can simply connect an Optical (Toslink) or Digital Coaxial Cable to the input, then the decoded audio can be transmitted as 2 channel analog audio via the Stereo RCA output or the 3.5mm output (suitable for headphones) simultaneously.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS and the Symbol together, and Digital Surround are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.

Features

• Decode Dolby Digital (AC3), DTS or PCM digital audio to stereo audio output.
• Support PCM 32KHz.44.1KHz, 48KHz, 88.2KHz, 96KHz, 176.4KHz, 192KHz sample frequency audio decode.
• Support Dolby Digital 5.1 channels, DTS-ES6.1 channels audio decode.
• No need to install drivers. Portable, flexible, plug and play

Package List

• 1 × Audio Decoder
• 1 × 5V/1A DC Adaptor
• 1× User Manual

Transmitter panel

Note: Please contact your distributor immediately if any damage or defect in the components is found.

Please study the panel drawings below and be familiar with the signal input(s), output(s) and power requirements.

Back Panel Top Panel Front Panel
R
L
DC 5V
COAXIAL
SPDIF
PT-C-DADM

Receiver panel

Audio DownMixer
PT
Dolby Digital (AC3)
DTS or PCM to Stereo

Specification

System Diagram

The following diagrams illustrate typical input and output connections that can be utilized with this decoder:

1. Connect a source (e.g. Blu-Ray Player, game console, A/V Receiver, etc.) to the audio Decoder’s SPDIF input port by fiber cable or Coaxial input port by coaxial cable.
2. Connect a headphone or analog audio amplifier to the audio output port on the Decoder.
3. Power on the Decoder and select the switch to your need audio input port.

Usage Precaution

• Make sure all components and accessories included before installation.
• System should be installed in a clean environment with proper temperature and humidity.
• All of the power switches, plugs, sockets, and power cords should be insulated and safe.
• All devices should be connected before power on

LED Status Indicator

After-Sales Service

If there appear some problems when running the product, please check and deal with the problems referring to this user manual. Any transport costs are borne by the users during the warranty.

1. Product Limited Warranty: This workmanship for three years (The Proof of purchase in the form of a bill of sale or receipted invoice which is Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the unit is within the Warranty period must be presented to warranty service.
2. What the warranty does not cover (servicing available for a fee):

• Warranty expiration.
• Factory applied serial number has been altered or removed from the product.
• Damage, deterioration or malfunction caused by:
• Normal wear and tear
• Use of supplies or parts not meeting our specifications
• No certificate or invoice as the proof of warranty
• The product model showed on the warranty card does not match with the model of the product for repairing or had been altered
• Damage caused by force majeure
• Servicing not authorized
• Any other causes which does not relate to a product defect
• Delivery, installation or labor charges for installation or setup of the product

1. Technical Support: For any questions or problems, contact your distributor or reseller and tell them the respective product name and version, the detailed failure situation as well as the formation of the cases.

Asking for Assistance

Technical Support:
Phone: +49 5971 800299
Fax: +49 5971 800299

Technical Support Hours:
8:30 AM to 5:00 PM Monday thru Thursday
8:30 AM to 4:00 PM Friday

Write to:
PureLink GmbH
Von-Liebig-Straße 10
D - 48432 Rheine
www.purelink.de
info@purelink.de

Legal & Compliance

Product identification

Model: PT-C-DADM – manual version 1.0

EU conformity

PureLink hereby declares that this product PureTools PT-C-DADM complies with Directives 1907/2006/EU and 2011/65/EU. PureLink GmbH hereby declares that this product PureTools PT-C-DADM complies with Directives 2014/30/EU and 2014/35/EU.

The full text of the EU Declaration of Conformity is available at: www.purelink.de

FCC

FCC FCC FCC FCC Statement It has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

Disposal of electrical and electronic equipment

WEEE reg. no.: DE 93847290

The crossed-out wheelie bin symbol on the product, packaging or in this manual means that electrical and electronic equipment must not be disposed of with household waste at the end of its life. Hand in old devices free of charge at a public collection point or return them to a distributor obliged to take them back. Remove batteries and lamps that can be removed without destroying the device before handing it in, and delete any personal data stored on the device. Details are regulated by national law. By returning old devices you help protect the environment.

Packaging

Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.