Active
HDA-250838
4K HDMI Downscaler with Dolby Audio® and DTS-HD® Stereo Audio Downmixing
The HDANYWHERE Dolby™ & DTS® AV Signal Manager is a 4K HDMI Downscaler with Dolby Audio® and DTS-HD® Stereo Audio Downmixing that supports the transmission of high bandwidth 18Gbps video through HDMI, with the ability …
ManualControl (TCP/IP)SpecificationsCEAvailable control interfaces. Expand an active type to see the full command table.
No matching commands.
Serial Communication over USB14 commandsActive
Source: manual, chapter Communicating over serial comms, page 8
| Command | Description | Response | |
|---|---|---|---|
| H | Help | ||
| STA | System status | ||
| SET RST | Reset to factory defaults | ||
| SET ADDR [XX] | Set device address to XX (00-99) 00=Single | ||
| SET ARC ON/OFF | Enable or disable ARC | ||
| GET ADDR | Get device address | ||
| GET ARC | Get ARC status | ||
| GET STA | Get device status | ||
| GET IN1 SIG STA | Get input & signal status from HDMI (IN) port | ||
| SET OUT[X] EXA EN/DIS | Set extracted audio output to enabled or disabled (X=0, 0=ALL) | ||
| SET OUT[X] STREAM ON/OFF | Set output [X] stream on/off (X=0-2, 0=ALL) | ||
| GET OUT[X] EXA | Get status of extracted audio output enabled or disabled (X=0, 0=ALL) | ||
| GET OUT[X] EDID DATA | Get output [X] EDID data (X=0-2) | ||
| GET OUT[X] STREAM | Get output [X] stream on/off status (x=0-2, 0=ALL) |