Vacuum Cleaner Floor Stand
INSTALLATION MANUAL
PERFECT EQUIPMENT FOR YOUR HOME
Vacuum cleaner floor stand illustration
PHD-D200B
PHD-D200W
Perfect HD | Am Wall 5 | D-48268 Greven
Phone: +49 (0)2571 - 5 68 90 52
Perfect HD hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.
Note: Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor.
Caution: CAUTION! Do not exceed the maximum weight of the stand.
- Any load or products heavier than the rated weights indicated may result in instability causing possible injury.
- The supplier accepts no liability for any damage or injury caused by improper installation or mounting.
- Use product for designated purpose only. This product should only be installed by a qualified professional.
- Improper installation may result in product failure or personal injury. Use appropriate tools and all fastened hardware and components.
- This product must be mounted only as indicated, using the supplied parts. Do not install where it may be exposed to moisture.
- Store installation tools for future maintenance. DO NOT allow children to play with installation hardware. Keep these items away from children.
Caution: This product may contain small parts that may present a choking hazard if swallowed. Keep these parts away from young children.
IMPORTANT: Examine the product immediately after unpacking and ensure that all parts shown are included. If any parts are missing or faulty, contact your place of purchase for a replacement. Do NOT use defective parts. Please retain this manual for future reference.
MAINTENANCE: Check that the product is secure and safe to use at regular intervals (at least every three months).
A (x1) B (x1) C (x4) D (x1) E (x1) F (x2) G (x2) M6x35 H (x6) M5x14 I (x4) M5x10 J (x2) M4x12x8 K (x1) 4mm
1
2
Note: Do not over tighten the screws.
3
4
5
V10/V11 V6 V7/V8
V10/V11 V6 V7/V8
Legal & Compliance
Product identification
Model: PHD-D200B – manual version 1.0
Warranty and liability
The manufacturer grants the full statutory warranty on all new devices. As the manufacturer has no influence on installation, the warranty only applies to the product itself. If you detect a fault or damage, please contact your dealer and provide your sales slip or invoice as proof of purchase.
The manufacturer is not liable for damage to persons or property caused by improper installation, operation or maintenance not described in this manual. Do not alter or modify the product or its accessories. Any use other than described in this manual is not permitted and voids warranty and guarantee.
Trademarks and disclaimer
Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.
Packaging
Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.