← Products
PureMounts® LCD Mount Tilt & Swivel 10-42"
Discontinued

PM-LM-TS32B

PureMounts® LCD Mount Tilt & Swivel 10-42"

PureMounts® LCD Bracket Tilting & Swivel 10-42" is a mounting bracket designed for LCD screens sized between 10 and 42 inches, offering tilt and swivel functionality.

ManualFAQ
Chapter 1 of 2

Full Motion LED, LCD TV Wall Mount

Installation Manual

Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.

Caution: Use with products heavier than the rated weights indicated may result in instability causing possible injury.

  • Do not begin installation if you have any questions or do not understand the instructions.
  • This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
  • This product is designed for use in wood stud and solid concrete wall construction only! Do not install into drywall alone.
  • This product is intended for indoor use only. Use of this product outdoors could lead to product failure and serious personal injury.
  • This product was designed to be installed by one person, but installation by two persons is strongly recommended.
  • Tighten the screws firmly, but do not over tighten. Over tightening can damage the items, greatly reducing their holding power.
  • Do not use this product for any purpose not explicitly specified by manufacturer. Improper installation may cause property damage or personal injury.
  • If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, please contact customer service or a qualified contractor.

Note: Ensure that you have received all parts according to the parts list. If any parts are missing or faulty, telephone your local distributor for a replacement.

Note: Check that the bracket is secure and safe to use at regular intervals (at least every three months).

PM-LM-TS32
PM-LM-TS32B
PM-LM-TS32W
50x50/75x75/75x100/100x100/200x100/200x200
10-42'' 25-107cm
30kg (66lbs) RATED

PureLink GmbH
Von-Liebig-Str. 10 | 48432 Rheine | Germany
Phone: +49 (0) 5971 800 299 0

PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.

ItemDescription
A(x1)
B(x1)
C(x1)
D(x1)
E(x1)
F(x2)
G(x1)
H(x1)
M-AM4x14 (x4)
M-BM5x14 (x4)
M-CM6x14 (x4)
M-DM8x20 (x4)
M-E(x4)
M-F(x4)
M-G(x8)
W-A(x3)
W-B(x3)

1a

  • Use a stud finder to locate the studs.
  • Attach mount (A) to the wall.
  • Secure with screws W-A.
  • Use a level to ensure mount is straight.
  • Suitable for wood stud walls only.

1b

  • Install mount (A) on concrete or brick wall.
  • Use drill and insert anchors W-B.
  • Secure with screws W-A.
  • Not suitable for hollow walls.

2

  • Attach part B to part C using screw D and washer E.

3

  • Select proper bolt and washer combination for TV as per diagram.
  • Mount C to rear side of display using M-E, M-F, M-G, and one set from M-A, M-B, M-C, M-D.

4

  • Attach F, F, G, and H to the wall mount arm as shown.

5

  • Hang TV onto the wall mount.
  • For safety, this step requires two people.
Was this helpful?
← PreviousNext chapter →
Staff sign-in