INSTALLATION MANUAL

Read this instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance. Please keep this manual for future reference.

Caution: The ceiling structure must be able to support four times the total weight of the installation. Otherwise, the structure must be reinforced.

Note: Installation must be carried out by a qualified personnel using suitable tools and measuring equipment.

Caution: Improper installation may cause damage or serious injury.

Note: The manufacturer is not liable for damage or injury caused by incorrect mounting, incorrect operation or misuse.

Caution: This product contains small parts which could be a choking hazard if swallowed. Keep these parts away from young children.

Caution: DO NOT overtighten screws or bolts as this may cause damage to the product, affect the performance or lead to failure.

Note: Maintenance: Check all screws and bolts at regular intervals to ensure that none are loose. If any parts are damaged or faulty, inform your local distributor. DO NOT use the product if any parts are damaged or faulty.

Tip: When attaching the brackets to screens with a curved rear panel, use suitable spacers and longer screws (not included).

Note: For indoor use only. The product is not suitable for use outdoors, in humid or wet environments or where excessive moisture or heat is present.

Caution: DO NOT use chemical or abrasive cleaners. Clean only with a soft, dry cloth.

Note: VESA-compatible mounting and precautions are also obligatory. Consult television manufacturer to verify wall mounting compatibility.

Mount illustration

PM-SLOPE-37

75x75/100x100/200x100/200x200
23"-42" (58-107cm)
25kg (44lbs)

PureLink GmbH
Von-Liebig-Str. 10 | 48432 Rheine | Germany
Phone: +49 5971 800 299 0

Note: PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.

Step 5 illustration: Inserting and securing the pole

Step 6 illustration: Attaching and securing mounting brackets (detail views)

Step 1

Step 2

3a

3b

Legal & Compliance

Product identification

Model: PM-SLOPE-37 – manual version 1.0

Warranty and liability

The manufacturer grants the full statutory warranty on all new devices. As the manufacturer has no influence on installation, the warranty only applies to the product itself. If you detect a fault or damage, please contact your dealer and provide your sales slip or invoice as proof of purchase.

The manufacturer is not liable for damage to persons or property caused by improper installation, operation or maintenance not described in this manual. Do not alter or modify the product or its accessories. Any use other than described in this manual is not permitted and voids warranty and guarantee.

Trademarks and disclaimer

Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.

Packaging

Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.