← Products
Speaker Floor Stand for SONOS ONE®, white
Discontinued

PM-SOM-061

Speaker Floor Stand for SONOS ONE®, white

The PureMounts speaker stand for SONOS ONE® and SONOS PLAY:1™ in white is designed to support speakers up to 3kg, with a height of 716mm and wall distance of 250mm. It is constructed from steel, aluminium, and plastic …

ManualFAQSpecifications
Chapter 1 of 6

For Sonos One® | Sonos® PLAY:1™

INSTALLATION MANUAL
Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local dealer.

  • CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
  • The equipment should be installed by qualified personnel using the proper tools and attaching hardware as specified in these instructions.
  • The wall or supporting surface must be strong enough to support the equipment and all attached hardware and components.
  • Tighten screws firmly, but do NOT overtighten. Overtightening can damage the items, greatly reducing their holding power.
  • DO NOT use this product for any purpose not explicitly specified by the manufacturer.
  • Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
  • Keep your work area tidy and clean up installation debris such as screws and packaging. Keep children away from hardware.
  • Regularly inspect all hardware and components for signs of damage, wear, or missing parts. If anything appears to be missing or faulty, contact your place of purchase for a replacement.
  • MAINTENANCE: Check that the product is secure and safe to use and tighten up all loose screws regularly (at least every five months).
Chapter 2 of 6

PM-SOM-060 / PM-SOM-061

Weight icon: 3kg (6.6lbs) RATED

PureLink GmbH
Von-Leiblg-Str. 10 | 48432 Rheine | Germany
Phone: +49 (0) 5971 800 299 0

PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.

Chapter 3 of 6

Step 1

Use part F to secure part C to part A with part E.

Chapter 4 of 6

Step 2

Attach part B and secure with parts D.

Use a screwdriver to tighten.

Chapter 5 of 6

Step 3

Attach the upper component down onto the base assembly as shown.

Was this helpful?
← PreviousNext chapter →
Staff sign-in