INSTALLATION MANUAL
TV Mount Compatible Sonos Beam Mount
For Full-Motion TV Mounts
PURE Mounts
PM-SOM-080
PM-SOM-081
5kg (11lbs) RATED
PureLink GmbH
Von-Liebig-Str. 10 | 48432 Rheine | Germany
Phone: +49 (0) 5971 800 299 0
PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.
Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor.
Caution: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
- The wall structure must be capable of supporting at least five times the weight of the product and its maximum load. If not, the wall must be reinforced.
- Installer must verify that any handling or installation of the product does not compromise the wall’s structural integrity.
- Safety gear and proper tools must be used. Failure to do so may result in injury or damage to the product or mounting surface.
- Tighten all screws but do not overtighten. Overtightening screws can cause damage to the product and attached hardware and components.
- This product is intended for indoor use only. Use of this product outdoors could lead to product failure and may result in personal injury.
- This product complies with the maximum load rating listed. Exceeding the maximum load rating can lead to the failure of the mount and or attached hardware and components and may cause injury or serious damage.
Note: Ensure that you have received all parts according to the parts list before you start installation. If any parts are missing or faulty, contact your place of purchase for a replacement.
Note: MAINTENANCE: Check periodically that the product is secure and safe to use and tighten all fasteners (at least every three months).
Step 1
| A (x1) | B (x2) | C (x2) | D (x2) | E (x2) | F (x2) | G (x1) |
|---|
Step 2
Note: We do not offer the screws. The screws should come with the TV bracket.
Step 3
Step 4
Legal & Compliance
Product identification
Model: PM-SOM-080 – manual version 1.0
Warranty and liability
The manufacturer grants the full statutory warranty on all new devices. As the manufacturer has no influence on installation, the warranty only applies to the product itself. If you detect a fault or damage, please contact your dealer and provide your sales slip or invoice as proof of purchase.
The manufacturer is not liable for damage to persons or property caused by improper installation, operation or maintenance not described in this manual. Do not alter or modify the product or its accessories. Any use other than described in this manual is not permitted and voids warranty and guarantee.
Trademarks and disclaimer
Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.
Packaging
Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.