← Products
Projector Mount
Discontinued

PM-SPIDER-20W

Projector Mount

The Adjustable Projector Ceiling Mount is a steel projector mounting bracket with a maximum load capacity of 13.5kg, designed for projectors with hole patterns up to 320mm. It offers stepless tilt adjustment from 15° to …

ManualFAQSpecifications
Chapter 1 of 2

Projector Ceiling Mount

INSTALLATION MANUAL

PUREMounts projector ceiling mount illustration
PUREMounts projector ceiling mount illustration

PM-SPIDER-20W
PM-SPIDER-30W
23 kg MAX 23 kg (50 lbs) RATED weight icon

PureLink GmbH
Von-Liebig-Str. 10 | 48432 Rheine | Germany
Phone: +49 (0) 5971 800 299 0

PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.

Read this entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.

  • CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
  • This product is designed for mounting a projector.
  • Do not begin the installation until you have read and understood the instructions and warnings contained in this manual. Improper installation may result in damage or serious personal injury.
  • If you do not understand the instructions or have any concerns or questions, please contact a qualified installer.
  • The manufacturer is not liable for damage or injury caused by incorrect mounting, assembly, or operation of the equipment and all attached fasteners and components.
  • Tighten screws firmly but do not overtighten. Overtightening screws can damage the items, greatly reducing their holding power.
  • This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.

IMPORTANT: Check that the supporting surface is strong enough to support the combined load of the equipment and mounting hardware. If mounting to a wooden joist, only mount directly to the centre of the joist. If mounting to solid concrete, solid brick or concrete block, use suitable anchors (not included). If you are unsure about the strength or suitability of the installation location, consult a qualified professional.

Note: Carefully inspect the parts and hardware for damage or missing parts. If you find any damage or faulty, missing or wrongly supplied parts, do not assemble or install. Contact your local distributor for assistance. Please retain this manual for future reference.

M3×8 (x4) | M4×10 (x4) | M5×10 (x4) | M6×10 (x4)
M-A | M-B | M-C | M-D

D3 (x4) | D4 (x4) | D5 (Φ8×12) (x4) | D6 (x4)
M-E | M-F | M-G | M-H

M5×12 (x6) | D5 (Φ5×10) (x6) | M5×12 (x2) | M-N (x1)
M-J | M-K | M-L |

W-A (x4) | W-B (x4) | W-C (x4)

1a

1b

3

Was this helpful?
← PreviousNext chapter →
Staff sign-in