DiscontinuedPossible alternative: PT-PSW-21KVM-40G
PT-PSW-21KVM
2x1 4K 18Gbps Multi-Format Collaboration Switcher Set
The PT-PSW-21KVM is an HDBaseT 3.0 collaboration extender set that transmits uncompressed 4K video, USB data, and Ethernet over long distances, featuring HDMI and USB-C DP Alt-Mode inputs for flexible device …
ManualControl (TCP/IP)FAQAlternative availableFirmwareCEAvailable control interfaces. Expand an active type to see the full command table.
No matching commands.
RS-232 Commands1 commandsActive
ConnectionBaud Rate: Supports 9600, 19200, 38400, 57600, 115200
Command Ending: NULL, CR, LF or CR+LF can be chosen.↓ CSV
Source: manual, chapter RS232 Tab, page 19
| Command | Description | Response | |
|---|---|---|---|
| Type the command in the box to control the third-party device which is connected to the RS232 port of the PT-PSW-21KVM. | Control the third-party device connected to the RS232 port. |
RS-232 Commands30 commandsActive
Source: manual, chapter RS232 Command, page 27
| Command | Description | Example | Response | |
|---|---|---|---|---|
| PHDBTON. | HDBaseT OUT POC power on | HDBT 01 Power ON! | ||
| PHDBTOFF. | HDBaseT OUT POC power off | HDBT 01 Power OFF! | ||
| HDMIA. | Auto-switch mode on HDMI Out | HDMI Out Switch Auto Mode! | ||
| HDMIM. | Manual-switch mode on HDMI Out | HDMI Out Switch Manual Mode! | ||
| HDMI[x]. | HDMI input source selection. x = 1 & 2 1 – Type-C 2 – HDMI | HDMI Out Switch To 01! | HDMI Out Switch To 01! | |
| POWON. | Turn off standby mode | Power ON! | ||
| POWOFF. | Turn on standby mode | Power OFF! | ||
| SIGNALTRG[xx]MODE. | When setting the detection mode xx=1, it is 5V detection, and when it is 2, it is TMDS detection. | Set Trigger Mode To 5V. | ||
| SIGNALTRGSTA. | Query the method of signal detection (TMDS or 5V) | Get Trigger Mode Is 5V. | ||
| RST. | Restore Factory | Factory Default! | ||
| Lock. | Turn on front panel lock | Front Panel Locked! | ||
| Unlock. | Turn off front panel lock | Front Panel UnLock! | ||
| STA. | Status query | PT-PSW-21KVM V1.0.0 PWON! HDBT 01 Power ON! HDMI OUT 01 Down Scale OFF! HDMI OUT 02 Down Scale OFF! HDMI Out Switch Auto Mode! Get Trigger Mode Is 5V. System Unlock! Baudrate9600! GUI_IP:192.168.0.200! HDMI Out Switch To 02! Set Output Black Screen ON! IN 1 2 LINK Y Y OUT 1 2 LINK Y Y Input 1 EDID From 1 User Define EDID! Input 2 EDID From 1 Internal EDID! OUT 01 HDCP MAT DISPLAY! OUT 02 HDCP MAT DISPLAY! Set POFF Delay To 600 Second(s)! | ||
| RS232ONSAVE:[Y],[xxx]. | Save the display terminal boot command sent when the input is detected. Y is the baud rate, 1--2400; 2--4800; 3--9600; 4--19200; 5--38400; 6-57600; 7 --115200; xxx is the command data | |||
| RS232OFFSAVE:[Y],[xxx]. | Save the display terminal shutdown command sent when no input is detected. Y is the baud rate, 1--2400; 2--4800; 3--9600; 4--19200; 5--38400; 6-57600; 7--115200; xxx is the command data | |||
| RS232DLYOUT[xx]:[yy]. | Set the delayed sending time of the display terminal shutdown command (CEC and RS232). Send when no input is detected; the default time is 10 minutes 600s [xx]=output,00~02 [yy]=second,01~600 | |||
| TVON. | Turn on TV by CEC control | CEC_TV_POWON! CEC Output 01 Send Success. CEC Output 02 Send Success. | ||
| TVOFF. | Turn off TV by CEC control | CEC_TV_POWOFF! CEC Output 01 Send Success. CEC Output 02 Send Success. | ||
| TVVOL+. | TV volume plus by CEC control | CEC_TV_VOLUP! CEC Output 01 Send Success. CEC Output 02 Send Success. | ||
| TVVOL-. | TV volume down by CEC control | CEC_TV_VOLDOWN! CEC Output 01 Send Success. CEC Output 02 Send Success. | ||
| TVMUTE. | TV mute by CEC control | CEC_TV_VOLMUTE/UNMUTE! CEC Output 01 Send Success. CEC Output 02 Send Success. | ||
| DS[x]ON. | Turn on the DOWN SCALE of the HDMI output. (Compatible with [X]/[XX]) [x] Value 0-2 or 00-02, 0 means all output | HDMI OUT 01 Down Scale ON! HDMI OUT 02 Down Scale ON! | ||
| DS[x]OFF. | Turn off the DOWN SCALE of the HDMI output. (Compatible with [X]/[XX]) [x] Value 0-2 or 00-02, 0 means all output | HDMI OUT 01 Down Scale OFF! HDMI OUT 02 Down Scale OFF! | ||
| STA_IN. | Source connection status | IN 1 2 LINK N N | ||
| /+[X]/[YY]:XXX. | RS232 sends commands to control peripheral devices. [YY]The value is 00 or 01; [X] is 1--2400; 2--4800; 3--9600; 4--19200; 5--38400; 6-57600; 7--115200 | 123456 | ||
| @OUT[xx]. | Turn on the HDMI 5V of the output port. [xx] The value 00-01, 00 means all outputs. | Set Output Black Screen ON! | ||
| $OUT[xx]. | Turn off the HDMI 5V of the output port. [xx] The value 00-01,00 means all outputs. | Set Output Black Screen OFF! | ||
| GETGUIIP. | Query GUI IP | GUI_IP:192.168.0.173! | ||
| SetGuiIP_DHCP ON. | Dynamic DHCP | GUI IP DHCP ON! | ||
| SetGuiIP_DHCP OFF:xxx.xxx.x.xxx. | Static DHCP+set IP (default is 192.168.0.178) | GUI IP DHCP OFF!SETGUIIP:192.168.0.123! |