Active
PT-SP-HD24-48G
2x4 HDMI 2.1 Splitter - 48Gbps with Scaler and Audio De-Embedding
The PT-SP-HD24-48G is a 2x4 HDMI 2.1 splitter and switcher supporting HDMI 2.1 signals up to 48Gbps FRL, enabling 8K at 60Hz (4:2:0, 12bit) and 4K at 120Hz (4:4:4, 12bit), with advanced feature compatibility including …
ManualControl (TCP/IP)SpecificationsDatasheetCE declaration ↗Available control interfaces. Expand an active type to see the full command table.
No matching commands.
Service port (USB-C virtual RS-232)38 commandsActive
Source: manual, chapter API Commands, page 15
| Command | Description | Example | Response | |
|---|---|---|---|---|
| ? | Get the list of all commands | ? | ||
| help | Get the list of all commands | help | ||
| get fw version | Get firmware version | get fw version | MCU version: 1.00.02 Chip 1 PS8419 version: 13.28 Chip 2 PS8419 version: 13.28 | |
| set power on/off | Set device power on/off | set power on set power off | Power on… System Initializing... Initialization Finished! FW: 1.0.0 Power off… | |
| get power | Get device power status | get power | Power on | |
| set reboot | Reboot the device | set reboot | Reboot… System Initializing... Initialization Finished! FW: 1.0.0 | |
| set reset | Reset to factory defaults | set reset | Sure to RESET to default settings? Type "Yes" after next prompt to confirm… | |
| get status | Get system status | get status | Please refer to the note at the end of the list | |
| set IR on/off | Set IR on/off | set IR on set IR off | Set IR on Set IR off on | |
| get IR | Get IR on/off status | get IR | IR on | |
| set key x on/off | Set front panel key (x=0~6) on/off x=0: All keys x=1: Power key x=2: Select key x=3: Display on key x=4: Display off key x=5: Volume down key x=6: Volume up key | set key 0 on set key 2 off | Set all key on Set select key off on | |
| get key x | Get front panel key (x=0~6) on/off status | get key get key 0 get key 2 | All key on All key on Select key on | |
| set baud x | Set RS-232 baud rate to x bps x=1: 4800 x=2: 9600 x=3: 19200 x=4: 38400 x=5: 57600 x=6: 115200 | set baud 6 | Set baud rate 115200 115200 | |
| get baud | Get RS-232 baud rate | get baud | Baud rate 115200 | |
| set input x | Set input video (x=0~2) x=0: Off x=1~2: HDMI input 1~2 | set input 1 | Set input HDMI 1 1 | |
| get input | Get input port | get input | Input HDMI 1 | |
| get hdmi5v | Get input HDMI 5V | get hdmi5v | HDMI 1: 5V HDMI 2: none | |
| set autoswitch x | Set auto-switching on/off (HDMI 5V detection) x=On, Off | set autoswitch on | Set autoswitch on on | |
| get autoswitch | Get auto-switching status | get autoswitch | Autoswitch on | |
| set output x downscale y | Set output (x=0~4) downscaling mode (y=0~1) x=0: all outputs x=1~4: HDMI output 1~4 y=0: Automatically according to display's capability y=1: Bypass video y=2: Force 1080p | set output 0 downscale 0 | Set all outputs downscale auto 0 | |
| get output x downscale | Get output (x=0~4) downscaling mode | get output 0 downscale | HDMI output 1 downscale auto HDMI output 2 downscale auto HDMI output 3 downscale auto HDMI output 4 downscale auto | |
| set output x display y | Set output (x=0~4) display mode (y=0~3) x=0: all outputs x=1~4: HDMI output 1~4 y=0: Off (disable TMDS output) y=1: Input video y=2: AVMUTE y=3: Internal pattern Note: When y is 1, 2, or 3, x must be 0. | set output 0 display 2 | Set all outputs display internal pattern 1 | |
| get output x display | Get output (x=0~4) display mode | get output 0 display | HDMI output 1 display internal pattern HDMI output 2 display internal pattern HDMI output 3 display internal pattern HDMI output 4 display internal pattern | |
| set output x HDCP y | Set output (x=0~4) HDCP mode (y=0~3) x=0: all outputs x=1~4: HDMI output 1~4 y=0: Reserved y=1: Follow sink y=2: Follow source y=3: Force HDCP 1.4 y=4: Force HDCP 2.2 | set output 0 HDCP 1 | Set all outputs HDCP follow sink 1 | |
| get output x HDCP | Get output (x=0~4) HDCP mode | get output 0 HDCP | HDMI output 1 HDCP follow sink HDMI output 2 HDCP follow sink HDMI output 3 HDCP follow sink HDMI output 4 HDCP follow sink | |
| set CEC on/off | Set CEC on/off | set CEC on set CEC off | Set CEC enable Set CEC disable Disable | |
| get CEC | Get CEC on/off status | get CEC | CEC enable CEC disable | |
| set generator x y | Set internal signal generator resolution (x=1~15) pattern (y=1~13) x=01: 8K30Hz x=02: 4K120Hz x=03: 4K100Hz x=04: 5K60Hz x=05: 5K50Hz x=06: 5K30Hz x=07: 5K25Hz x=08: 5K24Hz x=09: 4K60Hz x=10: 4K50Hz x=11: 4K25Hz x=12: 4K24Hz x=13: 1080P60Hz x=14: 480P60Hz x=15: 5760P50Hz y=01: Color bar y=02: Checkboard y=03: Strip y=04: Red y=05: Green y=06: Blue y=07: White y=08: Ramp y=09: Red ramp y=10: Green ramp y=11: Blue ramp y=12: PRBS y=13: Black | set generator 1 1 | Set generator 8K30Hz color bar | |
| get generator | Get internal signal generator output resolution and pattern | get generator | Generator 8K30Hz color bar | |
| set analog mute x | Set analog audio mute on/off x=On, Off | set analog mute on | Set analog mute on off | |
| get analog mute | Get analog audio mute status | get analog mute | off | |
| set analog gain x | Set analog audio gain (x=0dB ~ -79dB) | set analog gain -79dB | Set analog gain -79dB 0dB | |
| get analog gain | Get analog audio gain value | get analog gain | Analog gain -79dB | |
| set edid x to y | Set input ports (x=0~2) to EDID (y=0~41) x=0: all inputs x=1~2: HDMI input 1~2 y=00: HDMI 1080p@60Hz, Audio 2CH PCM (default) y=01: HDMI 1080p@60Hz, Audio 5.1CH DTS/DOLBY y=02: HDMI 1080p@60Hz, Audio 7.1CH DTS/DOLBY/HD y=03: HDMI 4K@60Hz 4:4:4, 8-bit, Audio 2CH PCM y=04: HDMI 4K@60Hz 4:4:4, 8-bit, Audio 5.1CH DTS/DOLBY y=05: HDMI 4K@60Hz 4:4:4, 8-bit, Audio 7.1CH DTS/DOLBY/HD y=06: HDMI 4K@120Hz 4:4:4, 8-bit, Audio 2CH PCM y=07: HDMI 4K@120Hz 4:4:4, 8-bit, Audio 5.1CH DTS/DOLBY y=08: HDMI 4K@120Hz 4:4:4, 8-bit, Audio 7.1CH DTS/DOLBY/HD y=09: HDMI 4K@120Hz 4:4:4, 10-bit HDR/DV, Audio 2CH PCM y=10: HDMI 4K@120Hz 4:4:4, 10-bit HDR/DV, Audio 5.1CH DTS/DOLBY y=11: HDMI 4K@120Hz 4:4:4, 10-bit HDR/DV, Audio 7.1CH DTS/DOLBY/HD y=32: EDID pass-through (Copy from Sink 1) y=33: EDID pass-through (Copy from Sink 2) y=34: EDID pass-through (Copy from Sink 3) y=35: EDID pass-through (Copy from Sink 4) y=36: Reserved y=37: Reserved y=38: Reserved y=39: Reserved y=40: User EDID 1 y=41: User EDID 2 | set edid 0 to 0 | Set all inputs EDID to SDF_00: HDMI 1080p@60Hz, Audio 2CH PCM (default) 0 | |
| get edid x | Get input ports EDID x=0: all inputs x=1~2: HDMI input 1~2 | get edid 0 | HDMI input 1 EDID SDF_00: HDMI 1080p@60Hz, Audio 2CH PCM (default) HDMI input 2 EDID SDF_00: HDMI 1080p@60Hz, Audio 2CH PCM (default) | |
| get edid data x | Get input ports EDID data x=0: all inputs x=1~2: HDMI input 1~2 | get edid data 0 | HDMI input 1 EDID HDMI input 2 EDID | |
| set user edid x | Set user defined EDID (x=1~2) x=1: User Defined 1 x=2: User Defined 2 y = 00 FF FF FF ….. (y is 256 bytes EDID data) | set user edid 1 | User defined 1 EDID is loaded successfully | |
| get user edid x | Get user defined EDID (x=1~2) x=1: User Defined 1 x=2: User Defined 2 | get user edid 1 | User defined 1 EDID |
Phoenix RS-232 port38 commandsActive
Source: manual, chapter API Commands, page 15
| Command | Description | Example | Response | |
|---|---|---|---|---|
| ? | Get the list of all commands | ? | ||
| help | Get the list of all commands | help | ||
| get fw version | Get firmware version | get fw version | MCU version: 1.00.02 Chip 1 PS8419 version: 13.28 Chip 2 PS8419 version: 13.28 | |
| set power on/off | Set device power on/off | set power on set power off | Power on… System Initializing... Initialization Finished! FW: 1.0.0 Power off… | |
| get power | Get device power status | get power | Power on | |
| set reboot | Reboot the device | set reboot | Reboot… System Initializing... Initialization Finished! FW: 1.0.0 | |
| set reset | Reset to factory defaults | set reset | Sure to RESET to default settings? Type "Yes" after next prompt to confirm… | |
| get status | Get system status | get status | Please refer to the note at the end of the list | |
| set IR on/off | Set IR on/off | set IR on set IR off | Set IR on Set IR off on | |
| get IR | Get IR on/off status | get IR | IR on | |
| set key x on/off | Set front panel key (x=0~6) on/off x=0: All keys x=1: Power key x=2: Select key x=3: Display on key x=4: Display off key x=5: Volume down key x=6: Volume up key | set key 0 on set key 2 off | Set all key on Set select key off on | |
| get key x | Get front panel key (x=0~6) on/off status | get key get key 0 get key 2 | All key on All key on Select key on | |
| set baud x | Set RS-232 baud rate to x bps x=1: 4800 x=2: 9600 x=3: 19200 x=4: 38400 x=5: 57600 x=6: 115200 | set baud 6 | Set baud rate 115200 115200 | |
| get baud | Get RS-232 baud rate | get baud | Baud rate 115200 | |
| set input x | Set input video (x=0~2) x=0: Off x=1~2: HDMI input 1~2 | set input 1 | Set input HDMI 1 1 | |
| get input | Get input port | get input | Input HDMI 1 | |
| get hdmi5v | Get input HDMI 5V | get hdmi5v | HDMI 1: 5V HDMI 2: none | |
| set autoswitch x | Set auto-switching on/off (HDMI 5V detection) x=On, Off | set autoswitch on | Set autoswitch on on | |
| get autoswitch | Get auto-switching status | get autoswitch | Autoswitch on | |
| set output x downscale y | Set output (x=0~4) downscaling mode (y=0~1) x=0: all outputs x=1~4: HDMI output 1~4 y=0: Automatically according to display's capability y=1: Bypass video y=2: Force 1080p | set output 0 downscale 0 | Set all outputs downscale auto 0 | |
| get output x downscale | Get output (x=0~4) downscaling mode | get output 0 downscale | HDMI output 1 downscale auto HDMI output 2 downscale auto HDMI output 3 downscale auto HDMI output 4 downscale auto | |
| set output x display y | Set output (x=0~4) display mode (y=0~3) x=0: all outputs x=1~4: HDMI output 1~4 y=0: Off (disable TMDS output) y=1: Input video y=2: AVMUTE y=3: Internal pattern Note: When y is 1, 2, or 3, x must be 0. | set output 0 display 2 | Set all outputs display internal pattern 1 | |
| get output x display | Get output (x=0~4) display mode | get output 0 display | HDMI output 1 display internal pattern HDMI output 2 display internal pattern HDMI output 3 display internal pattern HDMI output 4 display internal pattern | |
| set output x HDCP y | Set output (x=0~4) HDCP mode (y=0~3) x=0: all outputs x=1~4: HDMI output 1~4 y=0: Reserved y=1: Follow sink y=2: Follow source y=3: Force HDCP 1.4 y=4: Force HDCP 2.2 | set output 0 HDCP 1 | Set all outputs HDCP follow sink 1 | |
| get output x HDCP | Get output (x=0~4) HDCP mode | get output 0 HDCP | HDMI output 1 HDCP follow sink HDMI output 2 HDCP follow sink HDMI output 3 HDCP follow sink HDMI output 4 HDCP follow sink | |
| set CEC on/off | Set CEC on/off | set CEC on set CEC off | Set CEC enable Set CEC disable Disable | |
| get CEC | Get CEC on/off status | get CEC | CEC enable CEC disable | |
| set generator x y | Set internal signal generator resolution (x=1~15) pattern (y=1~13) x=01: 8K30Hz x=02: 4K120Hz x=03: 4K100Hz x=04: 5K60Hz x=05: 5K50Hz x=06: 5K30Hz x=07: 5K25Hz x=08: 5K24Hz x=09: 4K60Hz x=10: 4K50Hz x=11: 4K25Hz x=12: 4K24Hz x=13: 1080P60Hz x=14: 480P60Hz x=15: 5760P50Hz y=01: Color bar y=02: Checkboard y=03: Strip y=04: Red y=05: Green y=06: Blue y=07: White y=08: Ramp y=09: Red ramp y=10: Green ramp y=11: Blue ramp y=12: PRBS y=13: Black | set generator 1 1 | Set generator 8K30Hz color bar | |
| get generator | Get internal signal generator output resolution and pattern | get generator | Generator 8K30Hz color bar | |
| set analog mute x | Set analog audio mute on/off x=On, Off | set analog mute on | Set analog mute on off | |
| get analog mute | Get analog audio mute status | get analog mute | off | |
| set analog gain x | Set analog audio gain (x=0dB ~ -79dB) | set analog gain -79dB | Set analog gain -79dB 0dB | |
| get analog gain | Get analog audio gain value | get analog gain | Analog gain -79dB | |
| set edid x to y | Set input ports (x=0~2) to EDID (y=0~41) x=0: all inputs x=1~2: HDMI input 1~2 y=00: HDMI 1080p@60Hz, Audio 2CH PCM (default) y=01: HDMI 1080p@60Hz, Audio 5.1CH DTS/DOLBY y=02: HDMI 1080p@60Hz, Audio 7.1CH DTS/DOLBY/HD y=03: HDMI 4K@60Hz 4:4:4, 8-bit, Audio 2CH PCM y=04: HDMI 4K@60Hz 4:4:4, 8-bit, Audio 5.1CH DTS/DOLBY y=05: HDMI 4K@60Hz 4:4:4, 8-bit, Audio 7.1CH DTS/DOLBY/HD y=06: HDMI 4K@120Hz 4:4:4, 8-bit, Audio 2CH PCM y=07: HDMI 4K@120Hz 4:4:4, 8-bit, Audio 5.1CH DTS/DOLBY y=08: HDMI 4K@120Hz 4:4:4, 8-bit, Audio 7.1CH DTS/DOLBY/HD y=09: HDMI 4K@120Hz 4:4:4, 10-bit HDR/DV, Audio 2CH PCM y=10: HDMI 4K@120Hz 4:4:4, 10-bit HDR/DV, Audio 5.1CH DTS/DOLBY y=11: HDMI 4K@120Hz 4:4:4, 10-bit HDR/DV, Audio 7.1CH DTS/DOLBY/HD y=32: EDID pass-through (Copy from Sink 1) y=33: EDID pass-through (Copy from Sink 2) y=34: EDID pass-through (Copy from Sink 3) y=35: EDID pass-through (Copy from Sink 4) y=36: Reserved y=37: Reserved y=38: Reserved y=39: Reserved y=40: User EDID 1 y=41: User EDID 2 | set edid 0 to 0 | Set all inputs EDID to SDF_00: HDMI 1080p@60Hz, Audio 2CH PCM (default) 0 | |
| get edid x | Get input ports EDID x=0: all inputs x=1~2: HDMI input 1~2 | get edid 0 | HDMI input 1 EDID SDF_00: HDMI 1080p@60Hz, Audio 2CH PCM (default) HDMI input 2 EDID SDF_00: HDMI 1080p@60Hz, Audio 2CH PCM (default) | |
| get edid data x | Get input ports EDID data x=0: all inputs x=1~2: HDMI input 1~2 | get edid data 0 | HDMI input 1 EDID HDMI input 2 EDID | |
| set user edid x | Set user defined EDID (x=1~2) x=1: User Defined 1 x=2: User Defined 2 y = 00 FF FF FF ….. (y is 256 bytes EDID data) | set user edid 1 | User defined 1 EDID is loaded successfully | |
| get user edid x | Get user defined EDID (x=1~2) x=1: User Defined 1 x=2: User Defined 2 | get user edid 1 | User defined 1 EDID |