4x1 Multi-View Switcher - 18G – Control

Active

PT-SW-HD41MV

4x1 Multi-View Switcher - 18G

The PT-SW-HD41MV is a 4x1 multi-view seamless UHD video switcher with four HDMI 2.0b inputs and supports video resolutions up to 4K at 60Hz (4:4:4) at a maximum video bandwidth of 18Gbps, and is compliant with HDCP …

ManualControl (TCP/IP)FAQSpecificationsCE

Available control interfaces. Expand an active type to see the full command table.

API Commands65 commandsActive

ConnectionRS-232 Baud rate: 9600, Data bit: 8, Stop bit: 1, Parity bit: none, TCP/IP Port: 4001↓ CSV

Source: manual, chapter API Commands, page 8

Command	Description	Example	Response
?	Get the list of all commands	?	help!
help!	Get the list of all commands	help!
get model	Get device model	get model	PT-SW-HD41MV
status	Get device current status	status	Please see "Status Feedback" sheet
get version	Get firmware version	get version	BOOT: Vx.xx.xx MCU: Vx.xx.xx SCALER: xxxxxxxx-xx WEB: Vx.xx.xx
power on	Power on the device	power on	Power: on
power off	Power off the device	power off	Power: off
get power	Get current power state	get power	Power: on
reboot	Reboot the device	reboot	Reboot…
reset	Reset universal settings to default (Should type "Yes" to confirm, "No" to discard)	reset	Sure to reset universal settings to default? Type "Yes" after next prompt to confirm...
reset all	Reset all settings to default (Should type "Yes" to confirm, "No" to discard)	reset all	Sure to reset all settings to default? Type "Yes" after next prompt to confirm…
set front button x	Set front button locked on/off (x=0~1) x=0: Unlocked x=1: Locked	set front button 0	Button: unlocked 0
get front button	Get front button locked on/off status	get front button	Button: unlocked
set ir x	Set IR on/off (x=0~1) x=0: Off x=1: On	set ir 1	IR: on 1
get ir	Get IR on/off status	get ir	IR: on
get temp	Get device internal temperature	get temp	65°C
get uptime	Get device running time (Day:Hour:Min:Sec)	get uptime	000:00:13:04
set input x edid y	Set input (x=0~4) EDID (y=1~20) x=0: All Inputs x=1: HDMI Input 1 x=2: HDMI Input 2 x=3: HDMI Input 3 x=4: HDMI Input 4 y=1: 4K2K60_444, Stereo Audio 2.0 y=2: 4K2K60_444, Dolby/DTS 5.1 y=3: 4K2K60_444, HD Audio 7.1 y=4: 4K2K30_444, Stereo Audio 2.0 y=5: 4K2K30_444, Dolby/DTS 5.1 y=6: 4K2K30_444, HD Audio 7.1 y=7: 1080P, Stereo Audio 2.0 y=8: 1080P, Dolby/DTS 5.1 y=9: 1080P, HD Audio 7.1 y=10: 1920x1200, Stereo Audio 2.0 y=11: 1680x1050, Stereo Audio 2.0 y=12: 1600x1200, Stereo Audio 2.0 y=13: 1440x900, Stereo Audio 2.0 y=14: 1360x768, Stereo Audio 2.0 y=15: 1280x1024, Stereo Audio 2.0 y=16: 1024x768, Stereo Audio 2.0 y=17: 720p, Stereo Audio 2.0 y=18: Auto y=19: User Defined 1 y=20: User Defined 2 Default: 1	set input 0 edid 1	HDMI input 1 EDID: 4K2K60_444, Stereo Audio 2.0 HDMI input 2 EDID: 4K2K60_444, Stereo Audio 2.0 HDMI input 3 EDID: 4K2K60_444, Stereo Audio 2.0 HDMI input 4 EDID: 4K2K60_444, Stereo Audio 2.0
get input x edid	Get input (x=0~4) EDID mode x=0: All Inputs x=1: HDMI Input 1 x=2: HDMI Input 2 x=3: HDMI Input 3 x=4: HDMI Input 4	get input 0 edid	HDMI input 1 EDID: 4K2K60_444, Stereo Audio 2.0 HDMI input 2 EDID: 4K2K60_444, Stereo Audio 2.0 HDMI input 3 EDID: 4K2K60_444, Stereo Audio 2.0 HDMI input 4 EDID: 4K2K60_444, Stereo Audio 2.0
set user edid x	Set user defined EDID (x=1~2) x=1: User Defined 1 x=2: User Defined 2 y = 00 FF FF FF ... (y is 256 bytes EDID data)	set user edid 1	User defined 1 EDID is loaded successfully
get edid data x	Get EDID data (x=0~4) x=0: All Inputs x=1: HDMI Input 1 x=2: HDMI Input 2 x=3: HDMI Input 3 x=4: HDMI Input 4	get edid data 0	HDMI 1 input EDID data HDMI 2 input EDID data HDMI 3 input EDID data HDMI 4 input EDID data
set output res x	Set output resolution (x=1~15) x=1: 4096x2160p60 x=2: 4096x2160p50 x=3: 3840x2160p60 x=4: 3840x2160p50 x=5: 3840x2160p30 x=6: 3840x2160p25 x=7: 1920x1200p60RB x=8: 1920x1080p60 x=9: 1920x1080p50 x=10: 1360x768p60 x=11: 1280x800p60 x=12: 1280x720p60 x=13: 1280x720p50 x=14: 1024x768p60 x=15: Auto Default: 15	set output res 1	Output resolution: 4096x2160p60
get output res	Get output resolution	get output res	Output resolution: 4096x2160p60
set output hdcp x	Set output hdcp mode (x=1~2) x=1: HDCP 1.4 x=2: HDCP 2.2 Default: 1	set output hdcp 1	Output HDCP: HDCP 1.4
get output hdcp	Get output hdcp mode	get output hdcp	Output HDCP: HDCP 1.4
set output vka x	Set output video keep active pattern (x=1~2) x=1: Black Screen x=2: Blue Screen Default: 1	set output vka 1	Output VKA pattern: black screen
get output vka	Get output video keep active pattern	get output vka	Output VKA pattern: black screen
set output itc x	Set output video mode(x=1~2) x=1: Video Mode x=2: PC Mode Default: 1	set output itc 1	Output ITC: video mode
get output itc	Get output video mode	get output itc	Output ITC: video mode
set output freeze x	Set output freeze on/off (x=0~1) x=0: Off x=1: On	set output freeze 1	Output freeze: on 0
get output freeze	Get output freeze on/off status	get output freeze	Output freeze: on
set auto switch x	Enable/disable auto switch feature (x=0~1) x=0: Off x=1: On	set auto switch 0	Auto switch: off 0
get auto switch	Get auto switch feature	get auto switch	Auto switch: off
set in source x	Route input source to output (1~4) x=1: HDMI Input 1 x=2: HDMI Input 2 x=3: HDMI Input 3 x=4: HDMI Input 4 Default: 1	set in source 1	Output: HDMI input 1
get in source	Get output of single screen mode selected input source	get in source	Output: HDMI input 1
set multiview x	Set multi-viewer display mode (x=1~5) x=1: Single Screen x=2: PIP x=3: PBP x=4: Triple Screen x=5: Quad Screen Default: 1	set multiview 1	Multiview: single screen
get multiview	Get multi-viewer display mode	get multiview	Multiview: single screen
set window x in y	Select one input (y=1~4) for one display window (x=1~4) for the current Multiview mode x=1: Window 1 x=2: Window 2 x=3: Window 3 x=4: Window 4 y=1: HDMI Input 1 y=2: HDMI Input 2 y=3: HDMI Input 3 y=4: HDMI Input 4	set window 1 in 1	Window 1 select: HDMI input 1
get window x in	Get windows selected input source (x=0~4) x=0: All x=1: Window 1 x=2: Window 2 x=3: Window 3 x=4: Window 4	get window 1 in	Window 1 select: HDMI input 1
set window x border y	Set the border mode of window (x=0~4, y=0~9) x=0: All x=1: Window 1 x=2: Window 2 x=3: Window 3 x=4: Window 4 y=0: Off y=1: Black y=2: Red y=3: Green y=4: Blue y=5: Yellow y=6: Magenta y=7: Cyan y=8: White y=9: Gray Default: 0	set window 1 border 0	Window 1 border: off 0
get window x border	Get the border mode of window (x=0~4) x=0: All x=1: Window 1 x=2: Window 2 x=3: Window 3 x=4: Window 4	get window 1 border	Window 1 border: off
set window source osd x	Set window source osd switch (x=0~1) x=0: Off x=1: On Default: 0	set window source osd 1	Window source osd: on
get window source osd	Get window source osd switch	get window source osd	Window source osd: on
set PIP position x	Set PIP window position (x=1~4) x=1: Left Top x=2: Left Bottom x=3: Right Top x=4: Right Bottom Default: 3	set PIP position 3	PIP position: right top
get PIP position	Get PIP window positon	get window source osd	PIP position: right top
set PIP size x	Set PIP window size (x=1~3) x=1: Small x=2: Middle x=3: Large Default: 3	set PIP size 3	PIP size: large
get PIP size	Get PIP window size	get PIP size	PIP size: large
set PBP mode x	Set PBP windows display mode (x=1~2) x=1: PBP Mode 1 x=2: PBP Mode 2 Default: 1	set PBP mode 1	PBP mode 1
get PBP mode	Get PBP windows display mode	get PBP mode	PBP mode 1
set PBP aspect x	Set PBP windows display aspect ratio (x=1~2) x=1: Full Screen x=2: 16:9 Default: 1	set PBP aspect 1	PBP aspect: full screen
get PBP aspect	Get PBP windows display aspect ratio	get PBP aspect	PBP aspect: full screen
set triple mode x	Set triple windows display mode (x=1~3) x=1: Triple Mode 1 x=2: Triple Mode 2 x=3: Triple Mode 3 Default: 1	set triple mode 1	Triple mode 1
get triple mode	Get triple windows display mode	get triple mode	Triple mode 1
set triple aspect x	Set triple windows display aspect ratio (x=1~2) x=1: Full Screen x=2: 16:9 Default: 1	set triple aspect 1	Triple aspect: full screen
get triple aspect	Get triple windows display aspect ratio	get triple aspect	Triple aspect: full screen
set quad mode x	Set quad windows display mode (x=1~2) x=1: Quad Mode 1 x=2: Quad Mode 2 Default: 1	set quad mode 1	Quad mode 1
get quad mode	Get quad windows display mode	get quad mode	Quad mode 1
set quad aspect x	Set quad windows display aspect ratio (x=1~2) x=1: Full Screen x=2: 16:9 Default: 1	set quad aspect 1	Quad aspect: full screen
get quad aspect	Get quad windows display aspect ratio	get quad aspect	Quad aspect: full screen
set output audio vol+	Increase output audio volume	set output audio vol+	Output audio volume: 30
set output audio vol-	Decrease output audio volume	set output audio vol-	Output audio volume: 30
set output audio vol x	Set output audio volume value (x=0~100)	set output audio vol 30	Output audio volume: 30
get output audio vol	Get output audio volume	get output audio vol	Output audio volume: 30
set output audio mute x	Set output audio mute on/off (x=0~1) x=0: Off x=1: On Default: 0	set output audio mute 0	Output audio mute: off
get output audio mute	Get output audio mute on/off	get output audio mute	Output audio mute: off

Audio Setting2 commandsActive

↓ CSV

Source: manual, chapter API Commands, page 33

Command		Description	Example	Response
set output audio x		Set output audio source (x=0~4) x=0: Follow Window 1 Selected Source x=1: HDMI 1 Input Audio x=2: HDMI 2 Input Audio x=3: HDMI 3 Input Audio x=4: HDMI 4 Input Audio Default: 0Source: manual, chapter System Diagram, page 34	set output audio 0	Output audio: follow window 1 video source
get output audio		Get output audio source	get output audio	Output audio: follow window 1 video source

RS-232 Setting2 commandsActive

↓ CSV

Source: manual, chapter System Diagram, page 34

Command		Description	Example	Response
set baud x		Set RS-232 baud rate to x bps (x=115200/57600/38400/19200/9600/4800) Default: 9600	set baud 115200	Baud rate: 115200
get baud		Get RS-232 baud rate	get baud	Baud rate: 115200

Preset Setting5 commandsActive

↓ CSV

Source: manual, chapter System Diagram, page 34

Command	Description	Example	Response
set preset save x	Save the current unit's settings to the specified preset (x=1~8) x=1~8: Preset 1 ~ Preset 8	set preset save 1	Preset 1: save
set preset recall x	Recall a specified preset into unit (x=1~8) x=1~8: Preset 1 ~ Preset 8	set preset recall 1	Preset 1: recall
set preset clear x	Clear a specified preset into unit (x=1~8) x=1~8: Preset 1 ~ Preset 8	set preset clear 1	Preset 1: clear
set preset x name y	Set preset (x=1~8) name to y (y=[32 characters max]) x=1~8: Preset 1 ~ Preset 8	set preset 1 name Preset 1	preset 1 name: Preset 1
get preset x name	Get preset (x=1~8) name x=1~8: Preset 1 ~ Preset 8	get preset 1 name	preset 1 name: Preset 1

Network Setting11 commandsActive

↓ CSV

Source: manual, chapter System Diagram, page 35

Command	Description	Example	Response
set subnet xxx.xxx.xxx.xxx	Set network subnet mask	set subnet 255.255.0.0	Subnet mask: 255.255.0.0 (Please use "set net reboot" command to apply new config!) DHCP on, device can't config subnet mask, set DHCP off first.
get subnet	Get network subnet mask	get subnet	Subnet mask: 255.255.0.0
set gateway xxx.xxx.xxx.xxx	Set network gateway	set gateway 192.168.1.1	Gateway: 192.168.1.1 (Please use "set net reboot" command to apply new config!) DHCP on, device can't config gateway, set DHCP off first.
get gateway	Get network gateway	get gateway	Gateway: 192.168.1.1
set tcp/ip port x	Set network TCP/IP port (x=1~65535) Default: 4001	set tcp/ip port 8000	TCP/IP port: 8000
get tcp/ip port	Get network TCP/IP port	get tcp/ip port	TCP/IP port: 8000
set telnet port x	Set network Telnet port (x=1~65535) Default: 23	set telnet port 23	Telnet port: 23
get telnet port	Get network Telnet port	get telnet port	Telnet port: 23
set net reboot	Reboot network modules	set net reboot	Network reboot...
set net hostname x	Set network hostname to x (x=[32 characters max]) Default: PT-SW-HD41MV- ( Mac [4], Mac[5])	set net hostname 1234	Hostname: 1234 (Please use "set net reboot" command to apply new config!)
get net hostname	Get network hostname	get net hostname	Hostname: 1234

Password Setting4 commandsActive

↓ CSV

Source: manual, chapter System Diagram, page 37

Command	Description	Example	Response
set admin password x	Set admin login password to x (x=[16 characters max]) Default: admin	set admin password admin	Admin password: admin
get admin password	Get admin login password	get admin password	Admin password: admin
set user password x	Set user login password to x (x=[16 characters max]) Default: user	set user password user	User password: user
get user password	Get user login password	get user password	User password: user