DiscontinuedPossible alternative: PT-TOOL-501
PT-TOOL-500
PureTools - 4K HDMI LCD Test Monitor and 4K Signal Source
The PureTools - 4K HDMI LCD Test Monitor and 4K Signal Source is a device with an HDMI interface that functions both as a 4K LCD test monitor and a 4K signal source.
ManualControl (TCP/IP)FAQAlternative availableCEAvailable control interfaces. Expand an active type to see the full command table.
No matching commands.
Ethernet Control (Tcp/Ip)22 commandsActive
Source: manual, chapter Ethernet Control (Tcp/Ip), page 13
| Command | Description | Response | |
|---|---|---|---|
| 0x4d 0x53 0x5 0x0 0x0 0x5 0x1 | Set output resolution Hexadecimal | Received = ACK + Feedback Date ACK: 0xaa 0xbb 0xcc Feedback Date: Data0 Data1 Data2… | |
| 0x4d 0x53 0x5 0x0 0x0 0x5 0x2 | Get output resolution | Received = ACK + Feedback Date ACK: 0xaa 0xbb 0xcc Feedback Date: Data0 Data1 Data2… | |
| 0x4d 0x53 0x5 0x0 0x0 0x5 0x3 | Set output mode | Received = ACK + Feedback Date ACK: 0xaa 0xbb 0xcc Feedback Date: Data0 Data1 Data2… | |
| 0x4d 0x53 0x5 0x0 0x0 0x5 0x4 | Get output mode | Received = ACK + Feedback Date ACK: 0xaa 0xbb 0xcc Feedback Date: Data0 Data1 Data2… | |
| 0x4d 0x53 0x5 0x0 0x0 0x5 0x5 | Set output color depth | Received = ACK + Feedback Date ACK: 0xaa 0xbb 0xcc Feedback Date: Data0 Data1 Data2… | |
| 0x4d 0x53 0x5 0x0 0x0 0x5 0x6 | Get output color depth | Received = ACK + Feedback Date ACK: 0xaa 0xbb 0xcc Feedback Date: Data0 Data1 Data2… | |
| 0x4d 0x53 0x5 0x0 0x0 0x5 0x7 | Set default pattern Hexadecimal | Received = ACK + Feedback Date ACK: 0xaa 0xbb 0xcc Feedback Date: Data0 Data1 Data2… | |
| 0x4d 0x53 0x5 0x0 0x0 0x5 0x8 | Set user pattern Hexadecimal | Received = ACK + Feedback Date ACK: 0xaa 0xbb 0xcc Feedback Date: Data0 Data1 Data2… | |
| 0x4d 0x53 0x5 0x0 0x0 0x5 0x9 | Set audio mute | Received = ACK + Feedback Date ACK: 0xaa 0xbb 0xcc Feedback Date: Data0 Data1 Data2… | |
| 0x4d 0x53 0x5 0x0 0x0 0x5 0xa | Get audio mute status | Received = ACK + Feedback Date ACK: 0xaa 0xbb 0xcc Feedback Date: Data0 Data1 Data2… | |
| 0x4d 0x53 0x5 0x0 0x0 0x5 0xb | Set audio length | Received = ACK + Feedback Date ACK: 0xaa 0xbb 0xcc Feedback Date: Data0 Data1 Data2… | |
| 0x4d 0x53 0x5 0x0 0x0 0x5 0xc | Get audio length | Received = ACK + Feedback Date ACK: 0xaa 0xbb 0xcc Feedback Date: Data0 Data1 Data2… | |
| 0x4d 0x53 0x5 0x0 0x0 0x5 0xd | Set audio level | Received = ACK + Feedback Date ACK: 0xaa 0xbb 0xcc Feedback Date: Data0 Data1 Data2… | |
| 0x4d 0x53 0x5 0x0 0x0 0x5 0xe | Get audio level | Received = ACK + Feedback Date ACK: 0xaa 0xbb 0xcc Feedback Date: Data0 Data1 Data2… | |
| 0x4d 0x53 0x5 0x0 0x0 0x5 0xf | Set audio sample rate | Received = ACK + Feedback Date ACK: 0xaa 0xbb 0xcc Feedback Date: Data0 Data1 Data2… | |
| 0x4d 0x53 0x5 0x0 0x0 0x5 0x10 | Get audio sample rate | Received = ACK + Feedback Date ACK: 0xaa 0xbb 0xcc Feedback Date: Data0 Data1 Data2… | |
| 0x4d 0x53 0x5 0x0 0x0 0x5 0x11 | Set audio channel number | Received = ACK + Feedback Date ACK: 0xaa 0xbb 0xcc Feedback Date: Data0 Data1 Data2… | |
| 0x4d 0x53 0x5 0x0 0x0 0x5 0x12 | Get audio channel number | Received = ACK + Feedback Date ACK: 0xaa 0xbb 0xcc Feedback Date: Data0 Data1 Data2… | |
| 0x4d 0x53 0x5 0x0 0x0 0x5 0x13 | Set TX HDCP on/off | Received = ACK + Feedback Date ACK: 0xaa 0xbb 0xcc Feedback Date: Data0 Data1 Data2… | |
| 0x4d 0x53 0x5 0x0 0x0 0x5 0x14 | Get TX HDCP on/off | Received = ACK + Feedback Date ACK: 0xaa 0xbb 0xcc Feedback Date: Data0 Data1 Data2… | |
| 0x4d 0x53 0x5 0x0 0x0 0x5 0x15 | Set RX HDCP on/off | Received = ACK + Feedback Date ACK: 0xaa 0xbb 0xcc Feedback Date: Data0 Data1 Data2… | |
| 0x4d 0x53 0x5 0x0 0x0 0x5 0x16 | Get RX HDCP on/off | Received = ACK + Feedback Date ACK: 0xaa 0xbb 0xcc Feedback Date: Data0 Data1 Data2… |